NETCOM-111 : Single Port Ethernet - RS232

Descrição completa

NETCOM-111 is an industrial-strength network-based serial device server for connecting one RS232 device like CNC, PLC, weighting scale, scanner and other devices directly to the 10/100Mbps Ethernet network running TCP/IP. In addition to allowing serial devices to get networked, any host (PC Server or Workstation) without network access can also access remote serial device via adding NETCOM series devices to the existing serial port. NETCOM-111 can be configured over Driver Panels, WEB Browser, serial Port, Telnet, SNMP and serves as a transparent serial channel without platform and distance limitation.

• Can control 1 x RS232 devices located virtually anywhere (via Ethernet or Internet)
• LAN interface10BaseT/100BaseTx Ethernet
• Configuration utility automatically finds NetCom devices in the network
• Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
• Automatic mode switching between Driver and TCP RAW Mode
• Support TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
• Rugged metal enclosure
• External wall mount PSU included

Specification

Hardware

• Processor: ARM 7 TDMI 50MHz
• I/O controller: 16C550C or compatible
• Memory: 8MB SDRAM, 1 MB Flash
• Connector type: RJ45 for LAN, DSUB 9 female for serial Port

Interface

• LAN interface: Auto-detecting 10BaseT/100BaseTx
• Protocols: TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS
• Serial interface: RS232
• No. of port: 1, Speed up to 460Kbps
• Available Modes: RS232 full duplex
• Signals: RS232: Tx, Rx, RTS/CTS, DTR, DSR, DCD, RI, GND

Performance

• Speed: up to 460Kbps
• Parity: None, even, odd, space, mark
• Data bits: 5,6, 7,8
• Stop bits: 1,1. 5,2
• IRQ: None
• I/O address: None

Operating Modes:

Driver Mode: VScom Driver for Win XP, Win2000
Driver Mode creates virtual Com port

• TCP Raw Server: Raw data transfer over TCP/IP. Waits for incomming connections.
• TCP Raw Client: Raw data transfer over TCP/IP. Connects to a host or device which wait for incomming
  connections
• TCP Advanced Settings: Special settings for user-defined modes.
• UDP Mode: Raw data transfer UDP. The NetCom is client and server at the same time. With the timeout
  functionality and a configurable trigger string it could make defined UDP packets of incomming
  data.
• Null Modem Tunnel: Connecting two NetCom used as virtual null modem cable

Power and Environment

• Power requirements: 9 - 30V DC, 200mA
• Power supply Adapter: 9V, 500mA
• Dimension: 73×115×27 mm³ (W×L×H)
• 101×121×27 mm³ with connectors

Special Features:

• Installation: Configuration utility automaticly finds NetCom devices in the network
• Operating mode: Automatic mode switching between Driver and TCP RAW mode. With TCP Advanced settings it is possible to configure the NetCom for using it in multiple modes, so it decides automaticly which mode should be used.
• Configuration: Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP
• SNMP: special VScom MIB included
• ART: no
• DNS: Domäne Name Server support Serial interface: Serial Interface configurable with external switch
• Firewall: Special precautions for Firewall environments
• Firmware: Firmware update over WEB Browser, Telnet, ComPort
• LEDs: LEDs for Power, Tx, Rx, LAN Link, LAN Speed

Security:

• Password access: Every capabilities of configuration use the same password including SNMP V3